Home > Products > Radio Controlled products > DMSS Module Series TG2.4XP

DMSS Module Series TG2.4XP

DMSS Module Series DMSS Moddule / Receiver set for Module type transmitter only.
TG2.4XP
TX Module
[CONTENTS]
  • TX Module: TG2.4XP
No.03594
JAN Code
4944013 035948
RF-1131 2.4XP
Combo w/ RF MOD, 11ch RX
[CONTENTS]
  • TX Module: TG2.4XP
  • Receiver: RG1131B
No.03657
JAN Code 4944013 036570
RF-831 2.4XP
Combo w/ RF MOD, 8ch RX
[CONTENTS]
  • TX Module: TG2.4XP
  • Receiver: RG831B
No.03655
JAN Code 4944013 036556
RF-631 2.4XP
Combo w/ RF MOD, 6ch RX
[CONTENTS]
  • TX Module: TG2.4XP
  • Receiver: RG631B
No.03656
JAN Code 4944013 036563
RF-611 2.4XP
Combo w/ RF MOD, 6ch RX
(for Park Flyer)
[CONTENTS]
  • TX Module: TG2.4XP
  • Receiver: RG611B(for Park Flyer)
No.03654
JAN Code:4944013 036549
RF-411 2.4XP
Combo w/ RF MOD, 6ch RX
(for Park Flyer)
[CONTENTS]
  • TX Module: TG2.4XP
  • Receiver: RG411B(for Park Flyer)
No.03658
JAN Code:4944013 036587


For: 11X ZERO·PCM12X·PCM9X·PCM9XII·PCM9XII Limited

Accessories: Bind Plug, Adapter Pin (For 11X ZERO), Antenna Cap




Telemetry can be used in case you use this set with the following transmitter.
11X ZERO
  • Software upgrade(Ver.0002-0000 or new) is necessary. Please go to download page in the JR homepage.
  • Connect the provided adapter pin.
  • Be sure to set the radio to [DMSS] Modulation while using this module.
Installation of RE Module on 11X ZERO

  1. Adapter Terminal
    Protection Label
    Be sure to peel off protection label and attach adapter terminal on RF Module.
    Note that there is no direction on adapter terminal.

  2. Instllation of
    adapter terminal
    on RF Module.
    Be sure to peel off protection label on transmitter.

  3. Install RF Module on 11X ZERO Transmitter them complete the procedure on RF Module instllation.

DMSS receivers can be used if this DMSS module is set on the following transmitters.
PCM12X、PCM9X、PCM9XII、PCM9XII Limited
  • Be sure to set the radio to [PPM] Modulation while using this module.
  • These radios cannot use the Telemetry function.