Home > Products > Helicopters > 700-800 > Airskipper E12 Assembly Kit


Airskipper E12 Assembly Kit

OverviewSpecsIncludedParts & Accessories

Electric helicopter.
Designed and is based on Airskipper 90CF.
E12 conversion set AS is installed.

OverviewSpecsIncludedParts & Accessories

  • Overall length : 1,421mm
  • Overall width : 182mm
  • Overall height : 442mm
  • Gross weight : 5,300g or more (excluding main rotor blades)
  • Main rotor diameter : 1,605mm (with 720mm main rotor blades)
  • Tail rotor diameter : 288mm

Gear Ratio and Motor KV Value
BatteryPinionGear RatioGuideline of KV

OverviewSpecsIncludedParts & Accessories

Items included

  • Assembly Manual
  • Hex Wrench (1.5mm/2mm/2.5mm/3mm)
  • Thread Lock (Soft/Hard)
  • Big Horn×3  Super Horn×1
  • Lead harness150LG×3

Additional items required

  • 5-Channel or greater helicopter RC system with CCPM and 4 servos
  • Gyro System
  • Servo Horn (Big Horn 3pcs and Super Horn 1pc are included.)
    • Radius of 27mm (for CCPM) 3pcs
    • Radius of 16-18mm (for Rudder) 1pc
  • Lead harness (150LG 3pcs are included.)
  • 680mm-720mm long main rotor blade with 18mm thick blade grip,5mm mounting hole
    * Do not use Wooden Main Rotor blades.
  • Connector kit
  • Battery charger kit (Please select a charger compatible with your chosen batteries.)
  • Motor
  • ESC
  • Battery

E12 Helicopter series special page

Tools required for assembly

  • Phillips Screwdriver (Large/Small)
  • Nut Drivers (4mm/5.5mm/7mm)
  • Hex Drivers (1.5mm-4mm)
  • Cross Wrench (4mm-12mm)
  • Wrench (5.5mm/7mm/11mm)
  • Drills (4mm/6mm/8mm)
  • Needle-nose pliers
  • Soldering Kit
  • Sandpaper (#400-600)
  • Scale (30cm)
  • Scissors
  • Quick Drying Glue
  • Epoxy Resin (more than 30 minutes to become hardened)
  • JR Thrust bearing Grease [No.61005]
  • JR Universal Precision Pitch Gauge [No.60326]
  • Other general tools for assembling the model

Useful tools

  • JR Universal Ball Link Driver [No.61360]
  • JR Universal Ball Link Trimmer [No.60219]
  • JR Universal Ball Link Pliers C (Straight Tip) [No.60242]

OverviewSpecsIncludedParts & Accessories

Item :



JAN Code : 4944013 882672  

Last update : December 11,2015



The actual products may differ from the pictures shown.
For improvement of the products, appearance or the specifications are subject to change without notice.